PORSCHE GT4RS CARBON FIBRE END PLATE REPLACEMENTS

Direct replacement for the OEM original rear spoiler end plates. From the factory porsche does not offer a rear carbon exterior package to match the optional extras such as the Carbon Fibre roof. At AP we got right to work to give the GT3 an OEM + look.

Specs:

• Full Dry Carbon Fibre via our Autoclave Oven.
• Replacements are 250 Grams lighter than original ABS Plastic.

Installation:

Original Spoiler side panels are held in place with double sided tape. Using a hairdryer/heat gun carefully heat up the end panels till the tape softens and allows the end caps to be removed. Make sure to check temperature if using a heat gun close to the paintwork.

Once removed, make sure to clean and remove all the old tape, making for a clean prepped surface. 3M double sided tape has already been applied to the new Automotive Passion replacement end plates. Make sure to hold up the product on the car prior to removing the red film from the 3m tape.

The end panels come in full carbon (Non-painted GT4RS)

Fit:

• Porsche GT4RS 2022 Onwards